2000 Watt SUPER QUIET Inverter Generator with CO SECURE Technology (2024)

• Perform preventative maintenance, disconnect all electrical plugs, fill with proper fuel mixture, and turn the ESC Throttle to the OFF position. If the generator is in an environment below room temperature (78 F+), turn the Off / Run / Start Knob to Start (turn to Run if in room temperature or above, or if the engine was recently running and is still warm)
• Pull the starter rope until there is some resistance. Let the rope retract and then pull the rope quickly. Repeat rope pulling process as necessary until the engine starts.
• When the OUTPUT Light changes to On, slowly turn the Off / Run / Start Knob to Run, then plug in your devices

Generators with a carbon monoxide (CO) sensor can shut down the generator if carbon monoxide accumulates. Always ensure you are running the generator outside and away from enclosed spaces, also be sure the exhaust is not pointed into the wind; using a generator indoors CAN KILL YOU IN MINUTES. Generator exhaust contains carbon monoxide, a poison you cannot see or smell. NEVER use inside a home or garage, EVEN IF doors and windows are open. The carbon monoxide sensor is an additional layer of protection only. Do not use the generator in any area or situation that will allow carbon monoxide to accumulate (e.g., enclosed, poorly circulated areas). See manual for further details.

Some generators will shut down if the oil level is low because they are equipped with a low oil level shutdown mechanism to prevent damage. Check the oil level and if it is low, change and refill with fresh oil according to the owner’s manual.

Another cause of a portable generator shutting down may be that it is overloaded. Most devices have a power rating on them indicating how many amps they will draw. Add up the number of amps for all devices you are trying to power, and make sure this number does not exceed the maximum amps the generator can provide. See product manual for further details.

Generally, operating a generator at an altitude over 3,000 feet requires installation of a high-altitude kit. A high-altitude kit changes the amount of fuel delivered to the engine to maintain the optimal air/fuel ratio. Operating a generator at high altitude without a high-altitude kit installed may make it difficult to start the generator. The generator may also run roughly, not start high-powered loads, or cause the spark plug and/or spark arrestor not to function properly, requiring more frequent maintenance or replacement. If the generator that you purchased from Harbor Freight did not come with a high-altitude kit, Harbor Freight offers it as a service part. Please call 1-800-444-3353 for assistance.

Installation of a high-altitude kit involves modification of the generator’s fuel system and should be performed by a qualified mechanic. Improper installation of a high-altitude kit can lead to fuel leakage and present a fire hazard. Use only Harbor Freight-approved high-altitude kits for generators sold by Harbor Freight.