*#0808# - This code modify the USB settings. *#2222# - Open Hardware Version Samsung Galaxy S23 Plus. *#9090# - Display diagnostic configuration and RAM Dump *#1234# - View SW Version PDA, CSC, MODEM, Firmware version *#0*# - Show Advanced Test Menu. Samsung Galaxy S23 Plus. *#2663# - TSP / TSK firmware update *#12580*369# - Display information about Android software and hardware. *#0283# - Audio Loopback Control *#0228# or *#9998*288# or *#9998*0288# or *#8999*228# - Battery status ADC, RSSI reading *#0011# - ServiceMode Samsung Galaxy S23 Plus. #7465625*638*# - Insert Network Lock Key Code *#34971539# - Camera Firmware Menu Samsung Galaxy S23 Plus. *#0001# - Use this to the Show Serial Parameters of your handset. *#9125# - Activates the smiley when charging. *#0523# - LCD Contrast. *#9998*246# - Program status. *#9998*289# - Change Alarm Buzzer Frequency. *#9998*324# - Debug Screens. *#9998*364# - Watchdog *#9998*377# - EEPROM Error Stack - Use side keys to select values. *#9998*427# - Trace Watchdog. *#9998*523# - Change LCD contrast. *#9998*544# - Jig detect. *#9998*636# - Memory status *#9998*746# - SIM File Size *#9998*778# - SIM Service TableSamsung secret codes
*#06# - IMEI (International Mobile Equipment Identity) number
*#1111# or *#9999# or *#0837# - Software version Samsung Galaxy S23 Plus. Other secret codes that may work on other firmware and android versions.!
*#9998*785#- RTK (Run Time Kernel) errors - if ok then phone is reset
*#9998*786# - Run, Last UP, Last DOWN.
*#9998*837# - Software Version.
*#9998*9266# - Yann debug screen (Debug Screens).
*#9998*9999# - Software version
*#9125# - Smiley
*#8999*636# - Display Storage Capacity
*#8999*778# - Display SIM Card Information
*#8999*782# - Show Date And Alarm Clock
*#8999*786# - The Display During Warning
*#8999*837# - Samsung Hardware Version
*#0523# or *#8999*523# - Display Contrast
*#8999*638# - Show Network Information
*#8999*9266# - Display Received Channel Number And Received Intensity
*#8999*364# - Watchdog ON/OFF
*#8999*427# - WATCHDOG Signal Route Setup
*2767*3855# - Full Reset (Caution every stored data will be deleted.)
*2767*2878# - Custom Reset
*2767*927# - Wap Reset
*2767*5282# - Reset Millet's Java and other related
*2767*63342# - Data Reset (deletes photos, ring tones)
*#9998*4357# - Help Menu
*#9998*5282# - Java menu (GRPS / CSD settings for JAVA server)
*#9999#0# - Net monitor
*#8888# or *#9998*8888# - Hardware based version
*#9998*377# or *#9998*0377# - The error log
*#9998*778# or *#9998*0778# or *#0778# - SIM Service table
*#9998*782# - Shows the date and time when the alarm clock will ring
*#9998*5646# - Change the operator logo that shows up at the start of your
*#9998*76# - Manufacturing number
*#9998*968# - View the available sounds for alarm
*#9998*585# - Permanent memory phone
*#3243948# - Digital Audio Interference Off
*#32436837# - This will bring the Digital Audio Interference On option
*#2683662# - Service Mode
*#7353# - Test Menu
*#74123465* - Camera Firmware Standard
ANDROID Samsung secret codes for Samsung Galaxy S23 Plus
*#*#4636#*#* - Diagnostic and general settings mode Samsung Galaxy S23 Plus. 4 menus will appear on the phone screen: (Phone information, Battery information, Battery history, Usage statistics)
*#*#225#*#* - Check your events in calendar
*#*#426#*#* - Google Play service - Debug information
*#*#759#*#* - RLz Debug UI system hidden menu.
*#*#36245#*#* - Access Email debug info
*#*#8255#*#* - For Google Talk service monitoring
*#*#64663#*#* - To launch hardware test (Version, Sim, WLAN, Battery, Radio, Speakers, Bluetooth)
*#2886# - Factory Auto Testing
*#*#273282*255*663282*#*#* OR *#*#273283*255*663282*#*#* - Backup of all media files
*#*#7780#*#* - Used for a factory data reset. It'll remove following things: (Downloaded applications, Google account, all data and settings)
*2767*3855# - This code is used for factory format.
*#*#7594#*#* - Customize the operation of the "End Call / Power" button on your phone.
*#*#34971539#*#* - This code is to retrieve information about the phone camera.
*#*#97#*#* - Language and Keyboard settings in Samsung Galaxy S23 Plus
*#872564# - USB logging control
*#301279# - Use this code to show HSDPA/HSUPA Control Menu
*#9900# - System dump mode Samsung Galaxy S23 Plus
*#*#46*#*# - Reset Sim in Samsung Galaxy S23 Plus
*#*#197328640#*#* - Enter service mode to run various tests and change settings
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Get information of Wi-Fi Mac address
*#*#1472365#*#* - Show GPS test mode
*#*#1575#*#* - For a more advanced GPS test
*#*#232331#*#* - To troubleshoot Bluetooth
*#*#232337#*# - Shows Bluetooth device address in Samsung Galaxy S23 Plus
GSM codes for Samsung Galaxy S23 Plus
Change PIN code - **04* and enter the old PIN code, and twice a new PIN code.
Change PIN2 code - **042* and enter the old PIN2 code, and twice the new PIN2 code.
Unlock SIM (PIN) - **05* and enter the PUK code and new PIN code twice
Unlock SIM (PIN2) - **052* and enter the PUK2 code and new PIN2 code twiceCall Forwarding (you have to order the service from the operator)
##002# | And press dial to cancel all active call diverts. |
##004# | Cancel all conditional call forwarding |
**004* phone number # | Activate all conditional call forwarding |
Unconditional call forwarding (Call Forward All)
###21 | Switch off and deactivate |
#21# | Deactivate |
**21*phone number# | Enable and Activate |
*21# | Activate |
*#21# | Check the condition |
Diversion in case of "no answer"
###61 | Switch off and deactivate |
#61# | Deactivate |
**61* phone number# | Enable and Activate |
*61# | Activate |
*#61# | Check the condition |
Diversion in case of "not available"
### 62 | Switch off and deactivate |
# 62 # | Deactivate |
** 62 *phone number# | Enable and Activate |
* 62 # | Activate |
* # 62 # | Check the condition |
Diversion in case of "busy"
###67 | Switch off and deactivate |
#67# | Deactivate |
**67*phone number# | Enable and Activate |
*67# | Activate |
*#67# | Check the condition |
Call Barring (you have to order the service from the operator)
Change the password for all bans (default - 0000)
- ** 03 * 330 * old password * new password * new password #
How to bar all outgoing calls
**33*(enter password)#@ - To Activate
#33*(enter password)#@ - To Cancel
*#33#@ - Check Status
Barring of all calls on your phone
*330*(enter password)# - To Activate
#330*(enter password)# - To Cancel
*#330# - Check Status
How to block all outgoing international calls
*331*(enter password)# - To Activate
#331*(enter password)# - To Cancel
*#331# - Check Status
How to turn off all outgoing international calls when roaming
*332*(enter password)# - To Activate
#332*(enter password)# - To Cancel
*#332# - Check Status
Barring of all outgoing calls on your phone
*333*(enter password)# - To Activate
#333*(enter password)# - To Cancel
*#333# - Check Status
How to bar all incoming calls
*353*(enter password)# - To Activate
#353*(enter password)# - To Cancel
*#353# - Check Status
Barring all incoming calls during roaming on your phone
*351*(enter password)# - To Activate
#351*(enter password)# - To Cancel
*#351# - Check Status
Call waiting (you have to order the service from the operator)
*43# - To Activate
#43# - To Cancel
*#43# - Check Status
Transfer your phone number (Anti ANI)
#30#phone number - Block
*30#phone number - Allow
*#30# - Check Status
Show phone number of the caller you (ANI)
#77# - Block
*77# - Allow
*#77# - Check Status
Proceed with Caution: Use codes with care, as incorrect usage could affect device functionality.
If you're unsure about a code, do not use it. It's better to be safe than sorry.